Using Ductless Heating and Cooling Systems Using Ductless Heating and Cooling Systems
Ductless systems have a number of possible applications for institutional, commercial, and residential buildings in Bergen NJ. The typical applications of these systems are... Using Ductless Heating and Cooling Systems

Ductless systems have a number of possible applications for institutional, commercial, and residential buildings in Bergen NJ. The typical applications of these systems are in multifamily housing and in retrofit add-ones in homes with non-ducted heating systems, such as space heaters (propane, kerosene, and wood), radiant heaters, and hydronic (hot water) heaters.

Ductless installations in Bergen NJ are also a great choice for small apartments and room additions, where installing or extending ductwork for central heating and air conditioner systems may not be feasible.

Also referred to as mini-split systems, ductless systems comprise two main components. An indoor air-handling unit and an outdoor condenser/compressor. The indoor and outdoor units are linked by a conduit that houses the condensate drain, suction tubing, refrigerant tubing, and power cable.

Benefits of Ductless Systems

Among the main benefits of ductless AC repair & install in Bergen NJ are small size and flexibility that allow for zoning or cooling/heating individual rooms. Most models come with one outdoor unit and as many as four indoor air handling units for four rooms or zones.

The number is determined by the cooling/heating requirements for your building or each individual room, which is in turn determined by how well-insulated your building is. Each of the zones will have its own thermostat, meaning you can choose to condition that zone when it is occupied. This is energy-efficient and cost-effective.

Ductless installations in Bergen NJ are easier to install that traditional air conditioning systems. For instance, the link between indoor and outdoor units only needs a three-inch (approximately 8 cm) hole through the wall for the conduit.

Furthermore, many manufacturers of ductless systems can offer a variety of lengths for connecting conduits. Therefore, if need be, you can have your outdoor unit as far away as 50 feet (approximately 15 meters) from the indoor unit. This enables you to cool zones on the front part of your building with a compressor in a less conspicuous position outside your building.

In addition to that, the lack of ducts in mini-split ductless systems means that you need not worry about the energy loss associated with traditional forced-air systems. Air loss in ducts can account for more than thirty percent of energy consumption for space conditioning, especially in cases where ducts are located in unconditioned spaces such as the attic.

Ductless AC repair & install in Bergen NJ provide more flexibility in interior design options in comparison to other add-on systems. You can suspend the indoor air handlers from the ceiling, mount them flush into drop ceilings, or hang them on a wall. You can also use a floor-standing model. Most indoor units have a 7-inch (18-cm) deep profile and typically feature a sleek, appealing jackets.

A number of them offer remote control, making it easier to switch the system on or off when it is suspended from the ceiling or high up on a wall. Since there is hole in the wall will be small, ductless systems also ensure your building is safer, unlike window-mounted and through-the-wall systems that can provide an in-way for intruders.

Santo Tcora